The ENIAC: First General-Purpose Electronic Computer

Introduction

In February 1946, the United States Army Ordnance Department unveiled a machine that changed computing forever. The Electronic Numerical Integrator and Computer — known by its acronym ENIAC — was not the first electronic computer (that distinction belongs to the Z3 and Colossus), but it was the first fully general-purpose, Turing-complete, programmable electronic digital computer.

The ENIAC filled an 1,800-square-foot room, weighed 30 tons, contained 17,468 vacuum tubes, and consumed 174 kilowatts of power. It could perform 5,000 additions per second — roughly 200 times faster than the best electromechanical tabulating machines of the era.

But the most important thing about the ENIAC was not its speed or its size. It was the fact that it could be programmed. Unlike the Bell Labs differential analyzer (a specialized analog machine built for one class of problems) or the Harvard Mark I (a specialized digital calculator), the ENIAC could be reconfigured to solve any mathematical problem that could be reduced to arithmetic. That made it the bridge between the punched-card era and the modern digital age.

ENIAC: 17,468 Vacuum Tubes in Three Rows ROW 1: 8 Accumulators + 3 Multipliers — the heart of the machine ROW 2: 3 Dividers + 1 Square Root Unit — arithmetic operations ROW 3: 6 Program Panels — patch cables and switches for programming Each tube = 1 logic function 17,468 tubes total · 174 kW 30 tons · 1,800 sq ft 5 rows of panels · 5,000 miles of cable
Fig. 1 — The ENIAC's three rows of panels: Row 1 contained the accumulators and multipliers, Row 2 held the dividers and square-root unit, and Row 3 had the program panels where six women programmers connected patch cables to configure each new calculation.

The Problem: Ballistics at the End of World War II

The ENIAC was born from a very specific need: artillery firing tables. Before electronic computers, the U.S. Army's Ballistic Research Lab at Aberdeen Proving Ground employed a "Human Computer" — mostly women — who calculated firing tables by hand using Hollerith tabulating machines. Each table required about 750 hours of human computation, and the Army needed over 4,000 tables for every combination of artillery piece, altitude, temperature, humidity, wind, and charge.

The war accelerated demand. By 1943, the Army needed to calculate a firing table every 6 days, but the human computers were barely keeping pace. The breakthrough came when John Mauchly and J. Presper Eckert proposed replacing the electromechanical tabulators with an all-electronic machine — a bold idea at a time when most computers were still analog or specialized digital machines.

The project was initially classified under the name "Project PX." The Army funded it with $150,000 (about $2 million today), and construction began in late 1943 at the University of Pennsylvania's Moore School of Electrical Engineering.

Programming the ENIAC: Six Women and a Thousand Cables

The ENIAC had no operating system, no compiler, no memory hierarchy, and no instruction set in the modern sense. Programming the machine meant physically connecting 5,000 miles of patch cables between the program panels in Row 3, setting 3,000 switches, and configuring each of the 10 accumulators to perform specific arithmetic operations.

Six women — Betty Snyder, Marlyn Meltzer, Jean Bartik, Frances Spence, Ruth Lichterman, and Kay McNulty — were selected as the first ENIAC programmers. They had worked as "computers" at the Moore School, calculating trajectories by hand. They understood the math, and they understood the machine's architecture better than anyone else.

Firing Table Math problem with known variables → Program the 6 accumulators with patch cables 6 Programmers Snyder, Meltzer, Bartik, Spence, Lichterman, McNulty → 5,000 miles of patch cables + 3,000 switches ENIAC Machine 17,468 vacuum tubes · 30 tons 5,000 adds/sec → 26 min vs. 750 hrs manual
Fig. 2 — The ENIAC programming workflow: a firing table problem was translated into a program by six women who connected 5,000 miles of patch cables to configure the machine's 10 accumulators. The result: 26 minutes of calculation instead of 750 hours of manual work.

Performance: 5,000 Additions Per Second

The ENIAC could perform 5,000 additions per second. At first glance, this doesn't sound impressive — a modern smartphone can perform billions of additions per second. But in the context of 1946, it was extraordinary.

The Army's best electromechanical tabulating machines — the IBM 405 and 609 — could perform about 10-20 additions per second. The differential analyzer at MIT, the largest analog computer of its time, could solve differential equations in about 30 minutes that would have taken a team of human computers weeks. The ENIAC could solve the same equation in seconds.

Its first major use was calculating the hydrogen bomb design for the newly created Special Committee on the Hydrogen Bomb. A calculation that would have taken two months on the IBM tabulators took the ENIAC just 24 hours. For the Apollo program, the ENIAC's successors (the IBM 7090 and IBM 7094) computed the trajectories that sent astronauts to the Moon.

Legacy: From Punched Cards to Modern Computing

The ENIAC's most important contribution was not its speed or its ability to compute hydrogen bomb trajectories. It was the concept of the stored-program computer — a machine where the program and the data lived in the same memory, and where the program could be changed without rewiring the machine.

After the ENIAC was unveiled, Mauchly and Eckert left the University of Pennsylvania and founded the Eckert-Mauchly Computer Corporation, which built the UNIVAC I — the first commercially available computer. Their design philosophy — general-purpose, stored-program, electronic — became the template for every computer that followed, from the IBM 7000 series to the Intel 8086 to the modern CPU in your phone.

The six women programmers — often overlooked in the early history of computing — are now recognized as the first computer programmers. Their work demonstrated that programming was not just about mathematics; it was about understanding a machine's architecture, anticipating its behavior, and translating abstract problems into concrete configurations. That insight — that programming is a discipline in its own right — remains true today.

Key Takeaways

The ENIAC was the bridge between the punched-card era and modern computing. It proved that general-purpose electronic computation was possible, that programs could be changed without rewiring, and that a team of programmers could translate abstract mathematical problems into machine configurations. Its 17,468 vacuum tubes, 30 tons, and 1,800 square feet of floor space represented everything about early computing that was grandiose, expensive, and fragile — but the ideas it embodied were durable and universal.